Grid
List
LeMieux Bionic Stud Wrench
This is so easy to use -- no more guessing at stud sizes. This stud wrench adjusts easily by squeezing and turning; it distributes equal force on all sides of the stud. Will not slip, strip or round-off fasteners. It's easy on your knuckles, too.
SAE/metric sizes covered:
5 SAE sizes, 1/2, 9/16, 5/8, 11/16, 3/4 inch, and 9 Metric sizes, 12, 13, 14, 15, 16, 17, 18, 19, 20mm.
Height:
6 inches,...
LeMieux Easy Stud Plugz
The newest and best rubber plug on the market. A small hole in the center allows you to use a horseshoe nail for easy removal.
Color: Assorted Colors
Size: Bag of 60
LeMieux Safety Stud Tap
This high quality Safety Tap has a specially designed handle to give maximum grip and comfort in both wet and dry conditions. This eliminates cross threading and refurbishes damaged threads and leaves a clean threaded stud hole. A great asset to any stud kit!
Lincoln Metal Stud Tool
An all in one hoof pick and spanner tap.
Lincoln Spanner Tap
A durable spanner tap.
Lincoln Stud Kit
Stud kit in plastic box. Contains 8 x small studs, 8 x large studs, 8 x set screws, 1 x hexagon key bit, 1 x t-tap (3/8"), 1 x hoof cleaner and 10 x rubber stud hole stops. An ideal starter kit.
Liveryman Stud Cleaning Tap
For cleaning the thread before fitting the stud.
Liveryman Stud Plugs - Cotton
For packing out stud holes when not in use.
Liveryman Stud Plugs - Rubber
For packing out stud holes when not in use.
Liveryman Stud Tap & Spanner
3/8" tap with removable spanner for all studs.
Rescue Studs
Rescue Stud the Rescue remedy for loose stud holes thus eliminating the need to get your horse re-shod, becoming as important as carrying a spare wheel in the boot of your car. Can be tightened with a spanner or even a coin. All types are suitable for all equestrian activities. Type S is recommended for soft ground, Type P is recommended for firm ground and Type X is recommended for good ground.
Shires Spanner Tee tap
Shires Spanner Tee tap
A quality tap, set in a plastic handle for cleaning out stud holes.
Cleans and renews thread for 3/8" screws. Spanner top tightens and loosens most studs. 145cm (5 3/4") long.
Shires Wire Stud Brush & Pick
Shires Wire Stud Brush And Pick
'Must have' for any good stud kit, the Shires Wire Stud Brush Pick combines two key items in one, making it a convenient, top quality and space-saving tool
This useful tool features a wire brush at one end and a pick at the other for easy cleaning of stud holes. Comfortable shaped wooden handle. Total length 14cm (5.5").
Stromsholm Diamond Blank Studs
Small screw in stud, designed to protect the stud and keep thread clean before fitting competition studs
Stromsholm Diamond Hard Ground High Stud
Pointed stud for jumping on hard ground, made with tungsten pin.
Stromsholm Diamond Hard Ground Low Stud
Pointed stud for jumping on hard ground, made with tungsten pin.
Stromsholm Diamond Hard Ground XL Stud
Pointed stud for jumping on hard ground, made with tungsten pin.
Stromsholm Diamond Jumping/Polo Stud
Small square stud with rounded edges, can be used as small jumping stud on good ground. Approved byt the Hurlingham Polo Association.
Stromsholm Diamond Road Studs
Provides extra grip when riding shod horse on the roads. Made with a tungsten pin.
Stromsholm Diamond Soft Ground Studs
Domed shape stud made with a tungsten pin.
Stromsholm Diamond Soft Ground XL Studs
Domed shape stud made with a tungsten pin.
Stromsholm EL Road Studs
The Stromsholm EL Stud is known as a road stud and has been designed for hacking, hunting, all road work and interchanging with jumping studs. Made with a Tungsten core.
Stromsholm Felt Stud Plugs
Stromsholm Felt Stud Plugs. Push in stoppers to protect stud holes whilst not in use.
Pack of 20.
Stromsholm RJ Round Jumping Stud
The Stromsholm RJ Round Jumping Stud is for jumping and eventing, slightluy shorter tip giving penetration when the ground is not too firm. Thsi RJ jumping stud should be used with care on the inside shoe of horses that move close and if these studs are used in the front shoes a stud guard should be worn to protect the horses stomach from being studded over a fence.
Stromsholm Rubber Stud Hole Stoppers
The Stromsholm Rubber Stud Hole Stoppers are an easy and convenient way to keep stud holes clean when not in use. Simply push the stopper into the stud hole to help prevent grit, dirt and mud from damaging the thread of the stud hole.
Pack of 20
Stromsholm Screw In Studs - Blanks/Travel
Very low stud designed to keep stud holes clean prior to competition. Not designed for road work or competitions.
Stromsholm Screw In Studs - EL (Road Studs)
For all road work, hacking and hunting. Gives extra grip and wear when riding on roads
Stromsholm Screw In Studs - H (Soft Ground)
For most equestrian activities when there is good to soft ground.
Stromsholm Screw In Studs - Rounded Jumping XL
Gives penetration when the ground is not too firm.
Stromsholm Screw In Studs - TS (Hard Ground)
For Showing, Jumping and Eventing. For use on firm ground. Gives penetration and grip without jarring.
Stromsholm Screw In Studs - TSL (Hard Ground)
For Showing, Jumping and Eventing. For use on firm ground. Gives penetration and grip without jarring.
Stromsholm Screw In Studs - TSL (Hard Ground)
For Showing, Jumping and Eventing. For use on firm ground. Gives penetration and grip without jarring.
Stromsholm Screw In Studs - Type L
For most equestrian activities when a shorter stud is required.
Stromsholm Square - Polo/Jumping Stud
The Square - Polo/Jumping Stud is for jumping, cross country, eventing etc. The standard 3/8" size has rounded corners and is officially approved for polo.
Stromsholm T-Tap - 3/8"
An essential part of every stud kit.
Stromsholm TS Hard Ground Studs
The Stromsholm TS Low Stud is for use on firm ground, for showing, eventing and jumping. Gives penetration and grip without jarring. Made with a Tungsten core. This pointed stud should be used with care on the inside shoe of horses that move close and if these studs are used in the front shoes a stud guard should be worn to protect the horses stomach from being studded over a fence
Stromsholm Wire Stud Brush & Pick
Another essential piece of kit for the stud kit.
Stud Kit
Shires Stud Kit
This stud kit in a box contains a range of studs and accessories in a handy plastic carrying case.
The kit comprises: Assorted Studs - 8 Hard Ground Studs, 8 Jumping Studs. Spanner Tap, Screw in Stud Plugs, Rubber Stud Plugs and Stud Hole Brush & pick.
SupaSpanner
The perfect adjustable tool for all your SupaStuds.
SupaStuds Arena Stud
Designed specifically for use on an artificial surface; also good for muddy conditions.
A large stud - approx. length 20mm (excluding threaded section) with a 12mm square base tapering gradually to a point. The ideal shaped stud to give grip on an artificial surface (arena). Take care: we do not recommend this stud for use in front on ponies or horses not used to large studs - most users use a Polo...
SupaStuds Bullet Stud
SupaStuds Bullet Stud
Approved by the HPA for polo. Utility stud useful in a range of good to soft conditions. Approx. length 14mm (excluding threaded section). This is a really useful stud if the ground is not too hard or slippery, it can be used in front or behind on any size of horse/pony. A great option if you want a bit more grip than you would get from, say, the Large Road Stud.
SupaStuds Dressage Stud
SupaStud Dressage Stud
Conical, small radius stud requested by our dressage clients, but another good, utility hard ground stud. Approx. length 14mm (excluding threaded section).
SupaStuds Large Conical Stud
Large Conical Stud
Designed to give a precision response in deep going. Our longest stud - approx. length 25mm (excluding threaded section). Show jumpers love this stud to help with tight turns in a greasy outdoor ring. Take care: we do not recommend this stud for use on ponies, and would be cautious about using it on the inside due to the risk of striking the opposite leg - most users use a shorter...
SupaStuds Large Road Stud
Large Road Stud
After listening to customer feedback, we have introduced this slightly larger version of our original road stud (SS001) - the Large Road Stud has an approx. length of 9mm (excluding threaded section). It has also undergone an extra hardening process to make it even more hard-wearing to stand up to the rigours of road work. For this reason, it is slightly more expensive than the Original...
SupaStuds Long Bullet Stud
Designed to give extra grip in deep going. A long stud - approx. length 19mm (excluding threaded section). Ideal for those that need a big stud in muddy conditions but prefer not to use pointed studs. Take care: we do not recommend this stud for use on ponies, and it is too big to use as a front stud for the majority of horses. A great option where you need to be cautious about using a pointed stud...
SupaStuds Maxi Dome Stud
Maxi Dome Stud
Soft/deep going stud with oval shape for good grip. Approx. length 20mm (excluding threaded section). This is our largest soft ground stud and is most suitable for use in hind shoes in the softest conditions, particularly on large horses.
SupaStuds Medium Conical Stud
SupaStud Medium Conical Stud
Ideal for slippery grass or greasy surface on a hard base. Approx. length 18mm (excluding threaded section). Perfect when you need a bit more grip than you would get from the Small Conical Stud (SS002) - for instance when dew or a sudden shower is added to hard ground. Often suitable to be used in hind shoes in conjunction with Small Conical Studs in front shoes
SupaStuds Medium Dressage Stud
A larger version of the popular SS011. A great option for dressage, showing, jumping etc. when the ground is good to firm.Sized between the Small Dressage and Small Conical studs making it an excellent choice when more grip is needed.